Bluetooth LE Audio · The next-generation hearing system
Auracast™ & the Auri Mobile System
Auracast uses Bluetooth LE Audio to broadcast sound to compatible hearing aids, earbuds and personal receivers. Broadcasts can be open or access-code protected, depending on the application. The signal may pass beyond the room, so coverage and privacy need to be considered when planning a system.
What Auracast actually is
Auracast is a public broadcast feature of Bluetooth LE Audio, the new generation of Bluetooth ratified by the Bluetooth SIG and being rolled out across hearing aids, earbuds, smartphones and TVs from 2024 onwards. Unlike classic Bluetooth, which pairs one source to one sink, an Auracast transmitter can serve many compatible receivers simultaneously without individual pairing to each one. Suitable audio coverage still depends on the venue and transmitter setup.
Listeners join using their compatible hearing device, receiver or an Auracast assistant. Some setups use a phone or app, and a private broadcast may require an access code. Unlike an induction loop, Auracast does not need a floor or perimeter cable, but audio inputs, transmitter placement, coverage and privacy still need designing. Multiple broadcasts can be available in the same venue.
Where Auracast fits today
Auracast-capable hearing devices are becoming more widely available, but compatibility varies by model and software. A venue cannot assume that every current hearing-aid user can receive an Auracast broadcast directly.
Induction loops remain valuable for telecoil users. For some new installations, a hybrid system is sensible; elsewhere, a tested loop or a portable listening solution may be more appropriate. We recommend a system based on the people who need it, rather than a prediction about which technology will dominate in 2030.
Auri mobile listening systems
Portable Auracast without permanent building work
We can specify and supply an Ampetronic Auri portable system for venues that need hearing access without installing loop cable. A suitable transmitter receives audio from the venue’s sound equipment and broadcasts to compatible Auracast devices or dedicated receivers.
A practical package depends on your audio inputs, room coverage and listeners. Existing telecoil hearing-aid users may need receivers and neckloops; other visitors may need headphones. We’ll help you choose the right quantities and accessories, with setup support or training available by quotation.
For one-off events, Auracast hire enquiries are welcome. Tell us about your venue, dates and listening requirements, and we’ll discuss the options. Hire and demonstrations are subject to availability, with details confirmed by quotation.
Typical settings
- Council and community meetings
- Training rooms and shared meeting spaces
- Touring theatre, festivals and events
- Churches and chapels
- Heritage buildings where fixed wiring is impractical
Auracast vs. induction loop, at a glance
| Aspect | Induction loop | Auracast |
|---|---|---|
| Receiving device | Hearing aids or cochlear implant processors with telecoils | Compatible Auracast hearing devices, earbuds or receivers |
| Audio quality | Mono, voice-band | Stereo, music-band, very low latency |
| Privacy | Magnetic fields can extend beyond the loop area | Open or access-code-protected broadcasts; radio signals can pass through walls |
| Multi-stream | One loop per room | Multiple parallel streams (e.g. languages, audio description) |
| Install complexity | Wire perimeter + amplifier + commissioning | Transmitter unit, audio feed, antenna placement |
| Standards | IEC 60118-4 defines induction-loop performance | Needs assessment against accessibility requirements; IEC 60118-4 does not measure Auracast |